Armoring machine
Argon Arc Welding Pipe Corrugation Line
1. Application
Argon arc welding pipe producing line is designed and made based on the technical requirement for medium and high voltage cable. This line can roll Al/Cu tape longitudinally to Al/Cu pipe, which can cover cable or other wire that is requested to be armored and shielded. Pipe is welded by argon arc welding to be hermetically sealed armoring and shielding protector. In the company of the requirement for high automatization in cable industry, international advanced touching screen and HMI control system is applied in this line, which decrease the welding defect greatly, reduce labor intensity, increase the products yield and save producing cost.
2. Main Technical Specification
|
Thickness of welding Al & Cu tape |
Al Tape 1.0～3.5mm Cu Tape 0.5～1.2mm |
|
Dia. Of welding pipe |
Φ40～Φ160mm |
|
Welding speed |
2～6m/min (High speed on small size; low speed on big size) |
|
Welding current |
20～350A |
|
Max. corrugation rotating speed |
300r/min |
|
Corrugation depth |
1～8mm(Can be adjusted step-less) |
|
Corrugation pitch |
8～40mm |
|
Corrugation type |
Screw type & ring type |
|
Max. pull force |
60KN |
|
Max. linear speed |
8m/min |
|
Consumption of protecting air |
1m3/h |
|
Total capacity |
95KVA |
